J21S series general deep-throat press

Increased throat deep and working area.
Adopts horizontally placed crankshaft.
Rigid rotated bond clutch
Manual shut height adjustment with scale display
The type with “A” equipped with emergency stop device,which could make the slide stop at 0°～135°area and equipped with light curtain protector as well.

		J21S-6.3	J21S-10	J21S-16	J21S-25A	J21S-40A
Capacity	kN	63	100	160	250	400
Nominal Force	mm	2	2	2	2.5	4
Slide Stroke	mm	35	60	70	80	120
SPM	min-¹	170	145	125	60	55
Max. Die Height	mm	110	130	170	180	220
Die Height Adjustment	mm	30	35	45	70	80
Between Slide Center & Frame	mm	700	700	700	700	700
Bolster (FB×LR)	mm	200×310	240×360	320×480	400×600	480×700
Bolster Opening (Up Hole Dia.×Dpth×Low Hole Dia.)	mm	Φ60	Φ120×20×Φ100	Φ100	Φ120	Φ220×25×Φ180
Bolster Thickness	mm	40	50	60	70	80
Bolster Opening (Dia.×FB×LR)	mm	Φ140×110×160	Φ130×90×180	Φ210×160×240	200×200	200×240
Slide Area (FB×LR)	mm	120×140	150×170	180×200	210×250	270×320
Shank Hole (Dia.×Dpth)	mm	Φ30×55	Φ30×55	Φ40×60	Φ40×70	Φ50×70
Between Columns	mm	162	182	220	350	390
Motor Power	kW	0.75	1.1	1.5	2.2	4
Outline Size (FB×LR×H)	mm	1540×700×1525	1620×730×1800	1680×840×1880	1790×990×2288	1965×1180×2295

		J21S-63A	J21S-80A	JD21S-100A	JD21S-125A
Capacity	kN	630	800	1000	1250
Nominal Force	mm	4	5	6	6
Slide Stroke	mm	120	130	140	140
SPM	min^-1	50	45	38	38
Max. Die Height	mm	270	290	320	320
Die Height Adjustment	mm	80	100	100	100
Between Slide Center & Frame	mm	450/800	450/800	450/760	450/760
Bolster (FB×LR)	mm	480×710	580×860	710×1100	720×1200
Bolster Opening (Up Hole Dia.×Dpth×Low Hole Dia.)	mm	Φ200×45×Φ180	Φ200×45×Φ180	Φ260×50×Φ220	Φ260×50×Φ220
Bolster Thickness	mm	90	100	120	120
Bolster Opening (Dia.×FB×LR)	mm	200×250	220×260	260×290	260×290
Slide Area (FB×LR)	mm	280×320	280×380	420×560	420×560
Shank Hole (Dia.×Dpth)	mm	Φ50×80	Φ60×75	Φ60×80	Φ60×80
Between Columns	mm	450	450	580	580
Motor Power	kW	5.5	7.5	7.5	11
Outline Size (FB×LR×H)	mm	2220×1350×2600	2220×1380×2650	2530×1555×2990	2550×1610×2990